Back to Terminal blocks with electronics
VSP4 VA

VSP4 VA

Product name : VSP4 VA 10 (grey)

VSP4 VA 20 (grey)
 
Product (article) no. : 9287 (VA 10)

8994 (VA 20)
 
Packing quantity (pcs) : 1
Dim. in mm (length, height, thickness) : 70 x 55 x 6
Rated el. voltage (V) : Max. 275 V
Surge protection capability (kA) : 2,5 (8/20) – VA 10

6,5 (8/20) – VA 20
Weight (g) : 21

 

The VSP4 VA is a surge protection device - it is used for the protection of electrical circuits from overvoltage spikes (impulses). In order to fulfil its purpose, it must be connected to the consumer in a parallel connection.

According to the surge protection capability, 2 types of the VSP4 VA are available : VSP4 VA 10 - 2,5 kA (8/20) and VSP4 VA 20 - 6,5 kA (8/20).

Send inquiry
Category:
ACCESSORY : PRODUCT NAME : PRODUCT (ARTICLE) NO. : PACKING QUANTITY (pcs) :
Mounting rail 32 NVS 32 195 20
Mounting rail 35 NVS 35 9571 / 9092 20
End bracket PKPA 360 50
End bracket PKPA 35 8545 50
End plate KP 4 NA GREY 9506 50
Elastic label EO3 9439 200 pcs (1 PAC)
Elastic label EO4 9444 200 pcs (1 PAC)

Related products

VSP4 ST
VSP4 ST
Product name : VSP4 ST/12 (siva) VSP4 ST/24 (siva)
 
Product (article) no. : 8948 (ST/12) 9432 (ST/24)
 
Packing quantity (pcs) : 1
Dim. in mm (length, height, thickness) : 70 x 55 x 12
Vhodna napetost (V) : 15 – 35 DC
Izhodna napetost (V) : 12 DC / + ali – (ST/12) 24 DC / + ali – (ST/24)
Weight (g) : 40
  The VSP4 ST is a terminal block with an integrated voltage stabilizer and is recommended for the power supply stabilization of demanding (sophisticated) consumers. The max. rated current depends upon the difference between the input / output voltage.
Read more
VSP4 ACSS
VSP4 ACSS
Product name : VSP4 ACSS (grey)
Product (article) no. : 8949
Packing quantity (pcs) : 1
Dim. in mm (length, height, thickness) : 70 x 55 x 6
No. of switching contacts : 1 x NO Maks. 250 W / 250 V AC
 
Rated el. voltage of the coil (V) : 10 – 30 DC
Weight (g) : 20
  The VSP4 ACSS is a solid state relay, which is used to control (regulate) el. devices of a max. power of 250 W / 250 V AC. It has an integrated current detector, which detects the flow of current from the phase conductor to the neutral conductor (switch on) and therefore acts as an additional interference reducer during the switching on of devices.
Read more
VSP4 IMP
VSP4 IMP
Product name : VSP4 IMP (grey)
Product (article) no. : 8944
Packing quantity (pcs) : 1
Dim. in mm (length, height, thickness) : 70 x 55 x 6
No. of switching contacts : 1 x Maks. 400 mA / 48 V DC
 
Rated el. voltage of the coil (V) : 10 – 30 DC
Weight (g) : 22
  The VSP4 IMP is an impulse relay, which uses an input impulse, to turn the state of the switching contacts from on to off (and vice versa). It can also be used for the monostable creation of rectangular control impulses.
Read more